Why Backflush?
During filtration, particles may gradually build up inside the filter and affect water flow. Backflushing uses reverse water flow to help clear trapped debris, reduce clogging, and keep both the pre-filter and built-in purifier performing at their best.
Method 1｜Electric Backflushing with Main Unit
Recommended for Routine Maintenance
Use the Miniout Ace main unit to perform electric backflushing for both the pre-filter and built-in purifier. This method provides a simple and efficient way to maintain filter performance during regular use.
Pre-Filter Electric Backflushing
Step 1｜Connect the Care Hose
Attach the Care Hose to the water outlet and connect it.
Step 2｜Prepare Clean Water
Connect the inlet hose to the main unit and place it into clean water.
Step 3｜Start Backflushing
Turn on the main unit to begin reverse water flow through the pre-filter.
Step 4｜Restore Flow
Repeat until the water runs clear and water flow returns to normal.
Built-in Purifier Electric Backflushing
Step 1｜Attach the Adapter
Secure the backflush adapter to the built-in purifier.
Step 2｜Connect the Main Unit
Reconnect the water outlet assembly and attach the Care Hose.
Step 3｜Start Backflushing
Connect the inlet hose to clean water and turn on the main unit.
Step 4｜Check Performance
Repeat until the flushed water is clear and flow performance improves.
Method 2｜Manual Backflushing with Soft Flask
For Remote or Emergency Situations
When the main unit is unavailable or electric backflushing is not practical, use the Miniout Soft Flask for manual backflushing. This method provides a convenient solution for remote adventures and emergency situations.
Pre-Filter Manual Backflushing
Step 1｜Fill the Soft Flask
Fill the Soft Flask with clean water.
Step 2｜Connect the Adapter
Attach the backflush adapter to the Soft Flask.
Step 3｜Flush the Filter
Squeeze the Soft Flask to push water backward through the pre-filter.
Step 4｜Repeat if Needed
Refill the Soft Flask and repeat until the water flow is restored.
Built-in Purifier Manual Backflushing
Step 1｜Prepare Clean Water
Fill the Soft Flask with clean water and attach the backflush adapter.
Step 2｜Secure the Connection
Twist the adapter to lock it in place and connect the Water Bag.
Step 3｜Flush the Filter
Squeeze the Soft Flask to backflush the built-in purifier.
Step 4｜Restore Performance
Repeat until the flushed water is clear and the water flow improves.
Explore More Guides
Find detailed instructions, maintenance tips, and troubleshooting support to help you get the most out of your Miniout Ace.
Quickstart Guide
Troubleshooting Guide
Filter Replacement Guide
Product Care
